VikingPyrotechnics Posted March 2, 2014 Posted March 2, 2014 Here is my second attempt on a farfalle to report rocket. the timing of the reports this time is a lot better I think. in addition there are some strobe in the center and a small BS. http://www.youtube.com/watch?v=_1Mtqd3oahQ 1
pyrokid Posted March 3, 2014 Posted March 3, 2014 Beautiful. The strobes at the center of the break were a rather brilliant addition.
leedrill Posted March 3, 2014 Posted March 3, 2014 i know you have to be happy with that so damn nice perfect combination id like too see the bottom shot go after the strobe has completely finished { just my opinion } what size where the strobe stars id love to see more of them a little smaller so they burn out before the bottom shot and fill in the centre of the farfalle a bit more once again just my opinion but vp that is a competition winning combination i really loved that shell the timing on the farfalles where perfect i hope to be making shells like you one day
Zumber Posted March 3, 2014 Posted March 3, 2014 good one.!!The strobe looked really good.which formula for strobe did you used??
Zmuro Posted March 3, 2014 Posted March 3, 2014 That was a really nice rocket VP, I love the timing on farfalle inserts. Would you care to explain how you made those inserts?
VikingPyrotechnics Posted March 4, 2014 Author Posted March 4, 2014 Thank you guys Yes Lee, i agree. The strobes burned a little to long. ( 4-5mm Cut Stars ) Formula was Bleser White Strobe.
ddewees Posted March 4, 2014 Posted March 4, 2014 (edited) That was a really nice rocket VP, I love the timing on farfalle inserts. Would you care to explain how you made those inserts?I guess he missed your question... Here's a picture of them. http://www.amateurpyro.com/forums/gallery/image/2206-farfalle-to-report-inserts/ Edited March 5, 2014 by ddewees
Zmuro Posted March 5, 2014 Posted March 5, 2014 I looked at the farfalle to report inserts picture and it looks like the farfalle insert is joined with report or am I wrong? A cross section of this inserts would be nice.
WonderBoy Posted March 11, 2014 Posted March 11, 2014 Ooo impressive timing! And the strobes added a very pleasant shimmer. How were they placed in the shell? They stayed stayed pretty close to the center. Are you using the apertura burst? If so, how do you go about adding it to your canulle/burst core? WB
VikingPyrotechnics Posted March 11, 2014 Author Posted March 11, 2014 Thank you guys @ Zmurothose are some old pictures.... Today i do them a bit different. When i make some new one, i will take some pictures of it @ wonderboyThank you i mixed the strobe stars with the burst ( no canulle ) Just filled the space that left when i inserts all the farfalle inserts with MCRH and 3g of apetura and the strobe stars ....
Zumber Posted March 12, 2014 Posted March 12, 2014 (edited) What is apertura burst? Edited March 12, 2014 by swapnilsutar1988
TYRONEEZEKIEL Posted March 12, 2014 Posted March 12, 2014 This device was absolutely beautiful! No joke, what would it take to convince you to make a tutorial of that shell?
asdercks Posted March 15, 2014 Posted March 15, 2014 Just beautiful!!! you really make some great shells, just like tyron said it'd be nice if you could share some tutorials
VikingPyrotechnics Posted March 15, 2014 Author Posted March 15, 2014 (edited) Thank you guys Ok, i have made some more Farfalle inserts the last days and have taken some pictures. I will make a short video out of this pictures for you guys Later this day i will post the video .... Ok here it go: http://www.youtube.com/watch?v=5dklgd4U-_E feel free to ask if something isn´t clear Edited March 15, 2014 by VikingPyrotechnics 1
WonderBoy Posted March 27, 2014 Posted March 27, 2014 Thanks for the tut VP!What did you do in the last two steps? Was that an increment of clay over the flash, then masking tape? WB
Recommended Posts