Sparx88 Posted January 20, 2014 Share Posted January 20, 2014 I'm not finding very many options out there. One place has high price with 1/4" holes in them, others are cheaper but have size issues. I have 2" hdpe tubes. Thats 2" ID. So I need paper ball shells that are 1.75 OD with no holes. I use visco and like nice tight holes so I use an awl to make my own hole:) I admit it's been almost 2 years since I last bought any so would someone have some leads as to where I can get these like that? Link to comment Share on other sites More sharing options...
asdercks Posted January 20, 2014 Share Posted January 20, 2014 pyrodirect.compyrocreations.com Link to comment Share on other sites More sharing options...
Sparx88 Posted January 20, 2014 Author Share Posted January 20, 2014 (edited) Heres the pyrocreations item thats closesthttp://www.pyrocreations.com/inc/sdetail/556/77170 seems these are going to be a tight fit after pasting, maybe too tight? heres pyrodirect, they have the right size but shipping is 15 dollars for 2 sets(25sets) per set!http://www.pyrodirect.com/Item/005-4012 then these http://www.cannonfuse.com/store/pc/Paper-Ball-Shell-2-p34.htm Edited January 20, 2014 by Sparx88 Link to comment Share on other sites More sharing options...
shouldnoteatindat Posted January 20, 2014 Share Posted January 20, 2014 (edited) i think the ones at www.cannonfuse.com are pretty good sorry crap link here: http://www.cannonfuse.com/store/pc/Paper-Ball-Shell-2-7p34.htm Edited January 20, 2014 by shouldnoteatindat Link to comment Share on other sites More sharing options...
asdercks Posted January 20, 2014 Share Posted January 20, 2014 Heres the pyrocreations item thats closesthttp://www.pyrocreations.com/inc/sdetail/556/77170 seems these are going to be a tight fit after pasting, maybe too tight? heres pyrodirect, they have the right size but shipping is 15 dollars for 2 sets(25sets) per set!http://www.pyrodirect.com/Item/005-4012 then these http://www.cannonfuse.com/store/pc/Paper-Ball-Shell-2-p34.htmI'm using 2" shells (4 layers pasting) from pyrodirect and shooting them from a dr-11 mortar (1.91") and they fit just fine Link to comment Share on other sites More sharing options...
Sparx88 Posted January 21, 2014 Author Share Posted January 21, 2014 I'm using 2" shells (4 layers pasting) from pyrodirect and shooting them from a dr-11 mortar (1.91") and they fit just fine Ok ty. Just weighing the options. Heh, just reminded me of a Phish tune "Weigh"anyway...I made some orders. Link to comment Share on other sites More sharing options...
jaysgoh Posted January 21, 2014 Share Posted January 21, 2014 anyone know how to make 2 inch hemispheres ? i got 3 thick cardboard tube , some people said they use ping pong balls as the mold , is that suitbale ? Link to comment Share on other sites More sharing options...
Shizznt Posted January 21, 2014 Share Posted January 21, 2014 When you buy the shells, don't buy the ones that are lower in size. Buy the ones that say 2" because the 2" shells are actually a bit smaller. If you buy a 1.75" it would actually be 1.5". 2" shell would be 1-13/16". They make them that way so they will be close to 2" when your done pasting. I buy my shells from cannon fuse.com and they come without holes, but I don't buy 2" shell so I wouldn't know about those. Link to comment Share on other sites More sharing options...
schroedinger Posted January 22, 2014 Share Posted January 22, 2014 For a 2" shell you will need a mould that is 1.5 - 1.75 in diameter. I'm not sure if a ping pong ball is that big, but I'm pretty sure it is smaller. Maybe you should look into the vacum forming method for size size of shells. Link to comment Share on other sites More sharing options...
Recommended Posts