Flying fish fuse wheel

[Short5]

I saw Brimstones fuse battery and had an idea for a wheel. The pictures are pretty self explanitory. Many variations could be done just like normal wheels.

 

1. Cut cardboard about 3 inches long or to your liking.

2. Cut two pieces of flying fish fuse and insert it in ends of cardboard. Secure with glue if too loose.

3. Cut a piece of fast fuse and secure between fish fuse.

4. Secure a piece of visco.

5. Poke a hole in the center and insert a metal wire, paper clip, or long skinny nail.

6. Add a tiny drop of glue to the metal pin on either side of the wheel so the wheel does not slide up and down the wire.

7. Stick wire in a wood post and light.

[Baazis]

I'm gonna try and make one now looks simpel and fun to make!

 

Thanks for posting

[brimstoned]

Very cool!

I'll try some variations on this idea tonight (if the deluge lets up).