allrocketspsl Posted August 15, 2011 Posted August 15, 2011 (edited) if i may be so bold,I challenge anyone who makes bp rockets of any size to make three can shells; one with reports,one with stars and one with inserts of choice and put them ontop their rocket.They must break at 3 seconds from leaving the tube to break.Judges be the forum!(shells must break at 3 seconds from ignition) : this is what i mean by tree second delay testing new batch of bp 3 second delay test.wmv Edited August 16, 2011 by allrocketspsl
dagabu Posted August 15, 2011 Posted August 15, 2011 (edited) Done that already, timed inserts, comets and stars plus a bottom shot. The video is half lost as it went over the trees but I did take it. Does anyone want me to show you how I fused them? I will take this on but it will be October before I can shoot one.... -dag Edited August 15, 2011 by dagabu
SjeefOne Posted August 15, 2011 Posted August 15, 2011 Done that already, timed inserts, comets and stars plus a bottom shot. The video is half lost as it went over the trees but I did take it. Vid or it didn't happen @ Allrocket. I'll take you up on that.Let's see what you got. Give me a little time though, I'm in a pretty busy period.
dagabu Posted August 15, 2011 Posted August 15, 2011 Vid or it didn't happen @ Allrocket. I'll take you up on that.Let's see what you got. Give me a little time though, I'm in a pretty busy period. The sound is on the video but the last two breaks are not. Looks like I have to make another one? -dag
SjeefOne Posted August 15, 2011 Posted August 15, 2011 The sound is on the video but the last two breaks are not. Looks like I have to make another one? -dagAfraid so Sah'. Else it would be Audio or it didn't happen don't you think? Ow btw, Allrock what do you mean with "They must break at 4 seconds from leaving the tube to break" ?
dagabu Posted August 15, 2011 Posted August 15, 2011 Afraid so Sah'. Else it would be Audio or it didn't happen don't you think? Ow btw, Allrock what do you mean with "They must break at 4 seconds from leaving the tube to break" ? I'm good with that, I would like to see one in the clear in any case. I think what he means is that he wants it to be about 1000' up before breaking, either that or he wants the shells to break right over the ground. -dag
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 Afraid so Sah'. Else it would be Audio or it didn't happen don't you think? Ow btw, Allrock what do you mean with "They must break at 4 seconds from leaving the tube to break" ? from lift off to break 4 seconds,not looking ten thousands of a second or anything,flash of engine to break.Say October 15,2011 if all are good with that.Must have it posted by midnight the 10/15/11 (est) of if your in India noon the next day
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 Vid or it didn't happen @ Allrocket. I'll take you up on that.Let's see what you got. Give me a little time though, I'm in a pretty busy period. no problem mate and I will show you what I got trust me!lol
dagabu Posted August 15, 2011 Posted August 15, 2011 from lift off to break 4 seconds,not looking ten thousands of a second or anything,flash of engine to break.Say October 15,2011 if all are good with that.Must have it posted by midnight the 10/15/11 (est) of if your in India noon the next day I gotta ask, WHY the four seconds? -dag
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 I gotta ask, WHY the four seconds? -dag well three is quick, two is quicker, one even quicker and five to long,so four!
nater Posted August 15, 2011 Posted August 15, 2011 (edited) I will see what I can do, in fact I have 3 1 lb motors with no headers at the moment. Most likely my reports and stars will be BP based. You intend for a triple break cylinder shell, correct? Edited August 15, 2011 by nater
dagabu Posted August 15, 2011 Posted August 15, 2011 well three is quick, two is quicker, one even quicker and five to long,so four! "And the LORD spake, saying, "First shalt thou take out the Holy Pin, then shalt thou count to three, no more, no less. Three shall be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, neither count thou two, excepting that thou then proceed to three. Five is right out. Once the number three, being the third number, be reached, then lobbest thou thy Holy Hand Grenade of Antioch towards thy foe, who being naughty in My sight, shall snuff it." Amen" Four seems long to me -dag
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 "And the LORD spake, saying, "First shalt thou take out the Holy Pin, then shalt thou count to three, no more, no less. Three shall be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, neither count thou two, excepting that thou then proceed to three. Five is right out. Once the number three, being the third number, be reached, then lobbest thou thy Holy Hand Grenade of Antioch towards thy foe, who being naughty in My sight, shall snuff it." Amen" Four seems long to me -dag ok ok so the lord sayeth dont be late be here at three,is the number,three second delay!
SjeefOne Posted August 15, 2011 Posted August 15, 2011 Must have it posted by midnight the 10/15/11 (est).I'll have it up before 15/10/11. @ -Dag.. Preach on brother preach on.. I think 4 would be right about good just so you have the breaks nice and separated without them being to long..
dagabu Posted August 15, 2011 Posted August 15, 2011 ok ok so the lord sayeth dont be late be here at three,is the number,three second delay! Tell you what, I will lift a couple bottles with a pound of water and delay a three and four second break. BP is really tough to keep straight for four seconds with that big of a heading. -dag
guntoteninfadel Posted August 15, 2011 Posted August 15, 2011 So im confused as normal, but do all three go off at the same time? The doubles I have made have about a second between breaks and if your doing three that would be two mores seconds +/-, this thing going to have to go really HIGH or am I still confused?
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 So im confused as normal, but do all three go off at the same time? The doubles I have made have about a second between breaks and if your doing three that would be two mores seconds +/-, this thing going to have to go really HIGH or am I still confused? simple,from engine ignition to break three seconds,three different rockets and shells,ones a report of any kind one a stars hell of any kind one a insert shell of any kind,you will be judged on your best of the three, all Tell you what, I will lift a couple bottles with a pound of water and delay a three and four second break. BP is really tough to keep straight for four seconds with that big of a heading. -dag three seconds it is, All
allrocketspsl Posted August 15, 2011 Author Posted August 15, 2011 I will see what I can do, in fact I have 3 1 lb motors with no headers at the moment. Most likely my reports and stars will be BP based. You intend for a triple break cylinder shell, correct? three rockets one reports one inserts one stars three different ones judged on your best one when a member views your post they will score it 1 to 10 one with the most points wins a trip to new Zealand on Ralph
dagabu Posted August 16, 2011 Posted August 16, 2011 if i may be so bold,I challenge anyone who makes bp rockets of any size to make three can shells; one with reports,one with stars and one with inserts of choice and put them ontop their rocket.They must break at 3 seconds from leaving the tube to break.Judges be the forum!(shells must break at 3 seconds from ignition) : this is what i mean by tree second delay testing new batch of bp Try this link instead: http://www.pyrobin.com/files/3%20second%20delay%20test.wmv -dag
allrocketspsl Posted August 16, 2011 Author Posted August 16, 2011 Try this link instead: http://www.pyrobin.c...elay%20test.wmv -dag yeah i tried to connect pyrobin to this site couldnt do it,that was last nights fuel test
californiapyro Posted August 17, 2011 Posted August 17, 2011 what the hell I accept. I'll make em at do-it. cant do a report however :/
dagabu Posted August 17, 2011 Posted August 17, 2011 what the hell I accept. I'll make em at do-it. cant do a report however :/ Sure you can, binary mixing is allowed isn't it? -dag
allrocketspsl Posted August 17, 2011 Author Posted August 17, 2011 Sure you can, binary mixing is allowed isn't it? -dag anything is allowed as long as it breaks at three seconds,lol and is bp,one of each! All what the hell I accept. I'll make em at do-it. cant do a report however :/ curious why not? All
allrocketspsl Posted August 17, 2011 Author Posted August 17, 2011 (edited) if i may be so bold,I challenge anyone who makes bp rockets of any size to make three can shells; one with reports,one with stars and one with inserts of choice and put them ontop their rocket.They must break at 3 seconds from leaving the tube to break.Judges be the forum!(shells must break at 3 seconds from ignition) : this is what i mean by tree second delay testing new batch of bp *******WINNER WILL RECEIVE A free 6" X 12" (PVC) BALL MILL JAR Edited August 17, 2011 by allrocketspsl
dagabu Posted August 17, 2011 Posted August 17, 2011 (edited) *******WINNER WILL RECEIVE A free 6" X 12" (PVC) BALL MILL JAR If I win, send the jar to the second place winner, I make and sell those as a side line -dag Edited August 17, 2011 by dagabu
Recommended Posts