Col Posted September 12, 2013 Posted September 12, 2013 The holes are drilled tangently on opposite sides of the tube, i fuse with a small piece of bm in each hole. I only use them in shells or cakes so igniting the 2 fuses at once isnt an issue. I use handrolled tubes 3mm wall. Here`s a few fe-ti spiked hummers with coloured star comp pressed into the spare tube space. http://www.youtube.com/watch?v=7ofMvq8Tcfo
giod Posted September 12, 2013 Posted September 12, 2013 The holes are drilled tangently on opposite sides of the tube, i fuse with a small piece of bm in each hole. I only use them in shells or cakes so igniting the 2 fuses at once isnt an issue. I use handrolled tubes 3mm wall. Here`s a few fe-ti spiked hummers with coloured star comp pressed into the spare tube space. http://www.youtube.com/watch?v=7ofMvq8Tcfo so you are shooting those out of a cake it appears.. the hummers are loaded into individual tubes like a comet/canister would be? can they be shot as a canister of sorts? would love more detail on the setup..
Col Posted September 12, 2013 Posted September 12, 2013 Small cake, 3/4" id x 7.5" tubes, bottom fused with a couple of grams of lift in each.
giod Posted September 12, 2013 Posted September 12, 2013 (edited) I know i'm likely to get grief for this, but here goes.. How would one (hypothetically of course) make a hummer to report all in one? sectioned off partition with flash, with an internal timed fuse? Edited September 13, 2013 by giod
Mumbles Posted September 13, 2013 Posted September 13, 2013 That is not an easy thing to do. You tend to throw the balance off and kill the effect. I'd worry about making them work properly first before trying more advanced things.
giod Posted September 13, 2013 Posted September 13, 2013 That is not an easy thing to do. You tend to throw the balance off and kill the effect. I'd worry about making them work properly first before trying more advanced things. Yeah that was my concern too.. just curious was all.
Recommended Posts