jeepinjakear16 Posted June 8, 2011 Posted June 8, 2011 First I found an old hand operated drill presshttp://tapatalk.com/mu/436edb6d-a749-fc72.jpg Then I cut it down for my needshttp://tapatalk.com/mu/436edb6d-a836-ffbf.jpgThen I sand blasted and painted ithttp://tapatalk.com/mu/436edb6d-a86a-b9b4.jpgThen I started the trailerhttp://tapatalk.com/mu/436edb6d-a8b2-653d.jpgThen I got a pillow block bearing and mounted the shafthttp://tapatalk.com/mu/436edb6d-a8ee-3eec.jpgThen I built the barrels out of schedule 80 and welled a 3/8 end on ithttp://tapatalk.com/mu/436edb6d-a93c-ef44.jpgGot the barrels on u bolted it to the shafthttp://tapatalk.com/mu/436edb6d-a97c-2a7d.jpgAt the lake for the 4thhttp://tapatalk.com/mu/436edb6d-a9bd-f742.jpgFire work mortars going off I built this so I could shoot them at all kinds of angles and look cool doing it mortars are lame when the only go uphttp://tapatalk.com/mu/436edb6d-aa27-3dc9.jpg A video of me operating it I accidentally pulled it two far back operator errorCheck out this video on YouTube:
jeepinjakear16 Posted June 8, 2011 Author Posted June 8, 2011 I knew when I found this at a junk store my elevation prayers were answered and for some elbow grease paint and 15 bucks I can't complain http://tapatalk.com/mu/436edb6d-ab86-c475.jpg General idea General mock up Pretty much done
NAC Posted June 16, 2012 Posted June 16, 2012 very nice cannon project you got there! I'm impressed! I know the thread is a year old but- I had to make my first post before I could start a thread and this was a worthy thread
Recommended Posts