asilentbob Posted March 10, 2008 Posted March 10, 2008 The point was to not give that source to people who don't know what they are doing because it could hurt the resources available to the hobby. My choice in telling you wans't the best... If a mod could remove the "code" I would be grateful.
TheSidewinder Posted March 10, 2008 Posted March 10, 2008 pipipi, I don't know where you live. Given the the grammar in your question, I suspect it's outside the US. And that question has been asked by 10,000 other noobs who think it's going to be kewl to make Flash, and think they're being clever by just asking about Aluminum powder and not the other ingredient. I'm heading off this discussion before it even gets going. If you are considering making Flash, DONT. For you own sake, as well as for others physically near you. You are NOWHERE near ready to tackle that aspect of pyrotechnics. Go re-read the rules. No discussion of Flash is allowed, outside the HE section, and that includes attempts to be obscure about it. Under certain circumstances, in the discussion of shell-building by knowledgeable members, it's allowed to discuss amounts needed to do certain things (break, saettines, inserts, etc) but that's on a post-by-post basis and those allowed to do so know the limits of their discussion. Post Locked. z92 and mormonman, be thankful I'm in a good mood or I'd raise your warning levels. The last thing we need is someone blowing off their fingers, or worse. Think about what you post, especially in this section.
Recommended Posts