Jump to content
APC Forum

Any Australians here?


Edd

Recommended Posts

Actually I am in year 11. I do Drama, I aslo do Maths Applied, Physical Sciences, English Communications and Metalwork. I am doing quite well in all my subjects but without a view to university as I am going into blasting and display pyrotechnics straight after school.

 

Either way, your continued use of poor grammar and punctuation, especially to aggrevate other members, is an obvious flaunting of the rules of this forum and should not be tolerated.

Link to comment
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

  • maximusg

    11

  • Mephistos Minion

    9

  • [w00t]

    8

  • kwinchee

    8

Top Posters In This Topic

Posted Images

Yeah, Mephistos is right, you guys need to get your shit together. Don't act like little bitches about it either. [woot], your posts are border line. Kwinchee, wow, I think you were dropped on your head repeatedly as a child. Your spelling is absolutly terrible. I can hardly make sense of your posts most of the time. You actually spelled sulfur two ways in one sentence, wrong both times.

 

Your spelling, and acting like little kids reflects poorly upon the board. We do not run some 1337 pyro chat room here. This is a somewhat respectable pyro forum, and I intend to keep it that way. If you are going to keep acting like bitches and posting the way you are, I would have no problems banning you.

Link to comment
Share on other sites

"Attention shoppers, we have a bitch fight in aisle 5, a bitch fight in aisle 5". Yeah I much prefer proper sentences and grammar. Thanks MM and Mumbles :)

Thanks for everyone's replies so far, I appreciate it :)

Link to comment
Share on other sites

and its not a cert 3 its a fireworks display licence

its on saterday and every second sunday

b4 you start

 

And just to let you know I am you sing bad puncation and grammer just to piss you off so go [woot] freedy fish and the rest of your flash game friends

Well when you graduate with that fine science degree, remember that some adult someplace will be interviewing you for your job. I personally have passed on a kid with a great education while sitting on his interview as a telecommunications tech, due to his use of "dude" repeatedly in conversation.

 

Save the 733t stuff for your SMS phone, and strive to carry on conversations ( especially technical conversation! ) with proper English ( providing thats your native language )

Link to comment
Share on other sites

I myself stopped reading totse and other similiar forums a few years ago to get away from little shits like you two, [w00t] and kwinchee. If you want to actually discuss pyrotechnics, good. If you are going to waste board space then fuck off and go back to totse and argue about pointless shit.

 

God forbid that you use your brain and use decent grammar. People make mistakes and mispell words, and no one will harass you for that. You two are just wasting board space to be disrespectful to someone who politely asked you to type better than a 4 year old high on sugar. Which is definately unacceptable.

Link to comment
Share on other sites

I myself stopped reading totse and other similiar forums a few years ago to get away from little shits like you two, [w00t] and kwinchee. If you want to actually discuss pyrotechnics, good. If you are going to waste board space then fuck off and go back to totse and argue about pointless shit.

 

God forbid that you use your brain and use decent grammar. People make mistakes and mispell words, and no one will harass you for that. You two are just wasting board space to be disrespectful to someone who politely asked you to type better than a 4 year old high on sugar. Which is definately unacceptable.

says u? listen i didnt start anything, neither did kwinchee so mabye u should take ur own advice and get the fuck out.

 

harrasing someone because of grammar/spelling wont change anything, it makes us think that it annoys fuckheads like ur self so we continue to spell incorrectly just to piss u off, ur not helping anything.

 

if this forum was ran buy a person as smart as he thinks he is, he would of deleted offtopic and lame posts like the one im making now and the previous posts made by others, and would stop the discussiong of a lame subject were talking about which there for reflects baddly on the forum

Link to comment
Share on other sites

Hay man im sorry ill try better but I can't prommise 100%, I mean i do get C's in English, And I am sorry, also i dont want to come off as one of thoes people that think styrofome and petrol isw a realy cool plastic explosive
Link to comment
Share on other sites

styrofome and petrol isw a realy cool plastic explosive

how the fuck,, Styrofoam in petrol is was noobs call it to be Napalm.. and its not suppsoe to explode or anything close to it. it will burn very very slowlly like plastic

Link to comment
Share on other sites

Umm, w00t, you do realise that you quoted him out of context, and made one of the most post whorish posts I have seen in a while don't you?

 

kwinchee: Thanks fo trying harder, it makes you more understandable and respected than someone who puts no effort in whatsoever.

 

Anyway back on topic: If you are looking for KClO3, you can make it via electrolosis of KCl solution. A good source of carbon for electrodes is sold by CigWeld "gouging rods" I believe they are called. Availiable at your nearest welding shop.

Link to comment
Share on other sites

one thing Mephistos Minion and ill be back on topic. I know you nthink you are doing the right thing but thats why forums have mods.

 

Ok so bake to chemstry 101 actually i have quite a good electrollises setup going on now infact i have 5 containers in my attic on now using carbon electrodes and platnum wire. I just noticed someone saying that thay where tryo\ing to import kclo3 fertiliser on a post in the old APC. Dose any body have a good chem supply company online or over the phone that arnt that sus, other than kno3.com i will trade for an aussie company that supplies vast varities of mg and ti powder that dont evan look sideway at you when you order.

Cheers

Link to comment
Share on other sites

,Mar 5 2006, 10:03 AM]
I myself stopped reading totse and other similiar forums a few years ago to get away from little shits like you two, [w00t] and kwinchee. If you want to actually discuss pyrotechnics, good. If you are going to waste board space then fuck off and go back to totse and argue about pointless shit.

 

God forbid that you use your brain and use decent grammar. People make mistakes and mispell words, and no one will harass you for that. You two are just wasting board space to be disrespectful to someone who politely asked you to type better than a 4 year old high on sugar. Which is definately unacceptable.

says u? listen i didnt start anything, neither did kwinchee so mabye u should take ur own advice and get the fuck out.

 

harrasing someone because of grammar/spelling wont change anything, it makes us think that it annoys fuckheads like ur self so we continue to spell incorrectly just to piss u off, ur not helping anything.

 

if this forum was ran buy a person as smart as he thinks he is, he would of deleted offtopic and lame posts like the one im making now and the previous posts made by others, and would stop the discussiong of a lame subject were talking about which there for reflects baddly on the forum

Thanks kwinchee. w00t, you just can't catch on can you? Its not about who started anything, its about the fact that someone asked you to make your posts readable and you refused. And now you are purposefully doing it to " annoy fuckheads like ur self " which shows that you are an inmature jackass who needs to catch a hint.

 

kwinchee said that forums have moderators for this reason. Asking someone to make a post readable doesn't usually require a moderator. They have enough to do. Its when people like you w00t escalate things to this point that requires a moderator for a warning / banning. Which I am suprised hasn't taken place yet for your ignorant inmature attitude.

 

Take a look at some of the non US members who have sketchy english. No one harasses them for it, because they try, and we understand that. Grammar isn't the issue. The issue is that you are capable, but unwilling and are trying to be an annoyance.

Link to comment
Share on other sites

,Mar 5 2006, 10:03 AM]
I myself stopped reading totse and other similiar forums a few years ago to get away from little shits like you two, [w00t] and kwinchee. If you want to actually discuss pyrotechnics, good. If you are going to waste board space then fuck off and go back to totse and argue about pointless shit.

 

God forbid that you use your brain and use decent grammar. People make mistakes and mispell words, and no one will harass you for that. You two are just wasting board space to be disrespectful to someone who politely asked you to type better than a 4 year old high on sugar. Which is definately unacceptable.

says u? listen i didnt start anything, neither did kwinchee so mabye u should take ur own advice and get the fuck out.

 

harrasing someone because of grammar/spelling wont change anything, it makes us think that it annoys fuckheads like ur self so we continue to spell incorrectly just to piss u off, ur not helping anything.

 

if this forum was ran buy a person as smart as he thinks he is, he would of deleted offtopic and lame posts like the one im making now and the previous posts made by others, and would stop the discussiong of a lame subject were talking about which there for reflects baddly on the forum

Thanks kwinchee. w00t, you just can't catch on can you? Its not about who started anything, its about the fact that someone asked you to make your posts readable and you refused. And now you are purposefully doing it to " annoy fuckheads like ur self " which shows that you are an inmature jackass who needs to catch a hint.

 

kwinchee said that forums have moderators for this reason. Asking someone to make a post readable doesn't usually require a moderator. They have enough to do. Its when people like you w00t escalate things to this point that requires a moderator for a warning / banning. Which I am suprised hasn't taken place yet for your ignorant inmature attitude.

 

Take a look at some of the non US members who have sketchy english. No one harasses them for it, because they try, and we understand that. Grammar isn't the issue. The issue is that you are capable, but unwilling and are trying to be an annoyance.

oh shit man i used "u" instread of "you" and "r" instread of "are" fuck.. now i guess this post isnt readable now is it..

 

build a fucking bridge.. it doesnt take long ok, then take ur first step and go over it.

Link to comment
Share on other sites

[woot], I am tired of your bullshit. You're banned. You acted like a little baby when I denied you for HE access. If you can't be bothered to not be a stupid fuck all the time, you don't deserve to play with the big boys here. We will see you in a month.

 

kwinchee, I apreciate that you are willing to try harder. I think the best thing would be to run your posts through a spell checker in a word processing program.

Link to comment
Share on other sites

Nice job mumbles

 

....and if thats not post whoring....idk what is....but this thread has basically gone to shit and mumbles is prolly gonna delete all the bullshit anyway.

Link to comment
Share on other sites

Local hardware shop. A litre of 1835g/L H2SO4 for...I can't remember, about $40.

 

A lot of places don't stock it anymore, but me, living in shitsville, still thinking we're in the '50s, has got like 20 bottles on the shelf.

 

I got my 50% H2O2 from a hydro place too. There's a generic Oxy Plus called Xtreme Liquid Oxygen (or something). I got a litre of this 50% Xtreme stuff for $20 (500ml bottles were $12...DUH!). Then the lid leaked in the car and to try and save the seats I caught a nice dribble of H2O2. We were on a highway and didn't have any water in the car so I flicked my hands out the window and spat on them to dilute the H2O2. White hands are pretty cool though...

Hahaha, funny you should say that, I recently had a 500ml bottle of OxyPlus leak on me.. My mum picked up the shopping bag and had it leak on her hand...

 

And then she gave it to me and I got some on the tips of my fingers. The funny thing was that she experienced a burning sensation on the tips of her fingers but I did not. I think I was immune due to the thick calas skin on my fingers from guitar abuse ;)

 

But Yeah, I didnt think my skin could get any lighter, but my fingers sure as hell were white.

Link to comment
Share on other sites

Hi guy's I live in Australia and I'm having trouble getting magnesium would anyone know where i can get some?
Link to comment
Share on other sites

Yeah magnesium can be found as the sacrificial anode in old hot water systems... I obtained several kilos worth off a plumber mate of mine. But you can usually find dumped hot water systems at the local tip. Also try metal scrap yards. Here is an example of what an anode out of a water system looks like:

 

http://www.weewaautemuster.com/Pyro%20Shizzle/Chems/Magnesium%202.jpg

 

 

Those anodes are about 5 and 6 feet long. Plenty of Mg there ;)

Link to comment
Share on other sites

Maximusg is VERY lucky to get such clean ones so don't get your hopes up too much.

Here is what the ones I got from the tip look like:

 

http://img.photobucket.com/albums/v466/mep.../Anodebolts.jpg

 

As you can see they are covered in oxide.

 

There is a place that you can get pure Mg blocks for $34 for 2 Kilos. Look around a bit, you will find it. Either that or the tip is still good, find lots of other useful things there.

Link to comment
Share on other sites

I got an old water heater in the roof I'll have to get up there and have a look ond day.
Link to comment
Share on other sites

Maximusg is VERY lucky to get such clean ones so don't get your hopes up too much.

Here is what the ones I got from the tip look like:

 

http://img.photobucket.com/albums/v466/mep.../Anodebolts.jpg

 

As you can see they are covered in oxide.

 

There is a place that you can get pure Mg blocks for $34 for 2 Kilos. Look around a bit, you will find it. Either that or the tip is still good, find lots of other useful things there.

You need to befriend a plumber :D

Link to comment
Share on other sites

I’m am plumbing apprentice now so it might come in handy. :D

I'll have ask around see wat i can get.

Link to comment
Share on other sites

A tip when gringing down old (or new...fucking maximus :P ) Anodes. Rember to stop before you get half way, or your Mg will be contaminated with Fe filing (there is an iron rod in the middle of them). The contaminated stuff still works OK for flash and it makes some pretty cool sparks when it burns. Such as in this photo:

 

http://img.photobucket.com/albums/v466/mep...inatedFlash.jpg

Link to comment
Share on other sites

Wats the best tytpe of KNO3 fert to use,

13-00-38 or 13-00-46. I have 38 and i get terribaly slow bp but it just might be that i dont mill and i use charcole from a big bag at the hardware

 

P.s Dose anyone have a ball mill thay would sell me evan a home made 1

Link to comment
Share on other sites


×
×
  • Create New...