nhatnguyen191 Posted March 9 Posted March 9 . —i will be making some 5 inch shells soon, because i ran out of my nitrate booster this time, and i want to use 70kcl4+30al flash powder as a booster for the 5 inch shells, i dont know how many grams of this flash to use, i want a hard break, and symmetry, and the black powder i put on the hull is 6:1 but they are quite weak, they cannot be used for the purpose of lifting the shells, for my 4 inch shells i used 3.70g of 70kcl4+30al flash booster, they are very symmetrical and strong, and for the 5 inch, can i use 4.70g like the 4 inch
Almostparadise Posted March 9 Posted March 9 (edited) Probably? Hard to say. Perchlorate flash is ALOT more energetic. You may be better off waiting until you can make more nitrate booster. Otherwise I'd start w half or less than that for 70:30. Lots of variables. You need to do test shells. It may take just one shell or it may take more than one to find the amount that gives you the break your looking for. You should receive more input here. Edited March 9 by Almostparadise 1
nhatnguyen191 Posted March 9 Author Posted March 9 yeah maybe i should test them, starting probably 4.60g flash kcl4+al for 5inch clamshell 1 hour ago, Almostparadise said: Có lẽ vậy? Khó nói. Đèn flash perchlorate mạnh hơn RẤT NHIỀU. Bạn có thể đợi cho đến khi bạn có thể tạo ra nhiều chất tăng cường nitrat hơn. Nếu không, tôi sẽ bắt đầu với một nửa hoặc ít hơn thế cho tỷ lệ 70:30. Rất nhiều biến số. Bạn cần phải thử nghiệm vỏ đạn. Có thể chỉ cần một vỏ đạn hoặc có thể cần nhiều hơn một vỏ đạn để tìm ra lượng đạn mang lại cho bạn sự đột phá mà bạn đang tìm kiếm. Bạn sẽ nhận được nhiều thông tin đầu vào hơn ở đây.
pyrojig Posted March 9 Posted March 9 That’s pretty close (5g) for a 5and 6” . Start there and adjust to break w/o blind stars. Just remember as the shell size grows the need for booster decreases. There is more powder working for you in the volume of burst . 1
nhatnguyen191 Posted March 11 Author Posted March 11 On 10/3/2025 at 02:05, pyrojig said: Khá gần (5g) đối với 5 và 6”. Bắt đầu từ đó và điều chỉnh để phá vỡ mà không có sao mù. Chỉ cần nhớ rằng khi kích thước vỏ tăng lên, nhu cầu về bộ tăng cường sẽ giảm. Có nhiều bột hơn hoạt động cho bạn trong thể tích nổ. yes thanks for the sharing, this is my 4 inch hull used 3.60g flash 70kcl4+30 for enhancement, black powder on my hull is quite weak, with 4g flash pec many of my fireworks stars are blown away. video_20250304_095154_sửa.mp4
Almostparadise Posted March 11 Posted March 11 (edited) Beautiful!!!! What did you decide on for the 5" shells you are planning on as far as booster? Edited March 11 by Almostparadise 1
nhatnguyen191 Posted March 11 Author Posted March 11 2 hours ago, Almostparadise said: Đẹp quá!!!! Bạn đã quyết định chọn loại đạn 5" nào cho tên lửa đẩy mà bạn định dùng? With my next 5 shell I will be using the usual color changing star effect, and possibly also the nishski kamuro, incorporating a 3 inch green shell as the pistil inside.
nhatnguyen191 Posted March 11 Author Posted March 11 (edited) 4 giờ trước, Almostparadise đã nói: Đẹp quá!!!! Bạn đã quyết định chọn loại súng hỏa mai nào mà bạn định sử dụng? đây là một số trường hợp 4 inch của tôi từ trước đến nay, nhưng tôi không chụp chúng, chỉ còn lại một vài video Screenrecording_20250311_160754.mp4 Edited March 11 by nhatnguyen191
Zumber Posted March 11 Posted March 11 9 hours ago, nhatnguyen191 said: yes thanks for the sharing, this is my 4 inch hull used 3.60g flash 70kcl4+30 for enhancement, black powder on my hull is quite weak, with 4g flash pec many of my fireworks stars are blown away. video_20250304_095154_sửa.mp4 It was damn beautiful shell..!! Bravo..!! How many layers pasted? Can you share dragon flower recipe?? Thanks. 1
Zumber Posted March 11 Posted March 11 5 hours ago, nhatnguyen191 said: đây là một số trường hợp 4 inch của tôi từ trước đến nay, nhưng tôi không chụp chúng, chỉ còn lại một vài video Screenrecording_20250311_160754.mp4 Is there any shells stored inside red bag? If so, it's much dangerous to keep it near mortor tube. Another beautiful shell....!! Can you mention what kind of charcoal coating prime was used? 1
nhatnguyen191 Posted March 11 Author Posted March 11 (edited) 10 giờ trước, Zumber đã nói: Quả thực là một chiếc vỏ đẹp tuyệt vời..!! Tuyệt vời..!! Dán bao nhiêu lớp? Bạn có thể chia sẻ công thức làm hoa rồng không? Cảm ơn. 10 giờ trước, Zumber đã nói: Quả thực là một chiếc vỏ đẹp tuyệt vời..!! Tuyệt vời..!! Dán bao nhiêu lớp? Bạn có thể chia sẻ công thức làm hoa rồng không? Cảm ơn. vâng tôi dán băng dính giấy màu trắng, cho đến khi chúng gần vừa với ống màu vàng chuyên dụng, và vừa với ống khi thêm dây qick mach, chính xác là chúng được dán bằng 8 lớp băng dính 1,5 cm, Edited March 12 by nhatnguyen191
Zumber Posted March 12 Posted March 12 I can't understand this language. As per forum rule you are supposed to post in English language only. Unable to understand this post.
DavidF Posted March 12 Posted March 12 yes i put white masking tape on, until they almost fit the yellow tube, and fit the tube when adding the qick mach wire, to be exact they were put on with 8 layers of 1.5 cm masking tape,
Zumber Posted March 12 Posted March 12 1 hour ago, DavidF said: yes i put white masking tape on, until they almost fit the yellow tube, and fit the tube when adding the qick mach wire, to be exact they were put on with 8 layers of 1.5 cm masking tape, Thank you.
Recommended Posts