Foguete Posted January 4 Posted January 4 (edited) VID_20241230_232238~2.mp4 This is a 30mm 100 shot firework cake, it was supossed to last longer but will be improving in the future. Effects used: - Barium nitrate green star Pressed. - White stars+ atomized aluminum Rolled. - Silver twinkling matrix comet Pressed. - Report inserts (for final rows). Lift: 6g granulated BP. VID_20241230_232238~3.mp4 Edited January 4 by Foguete I forgot to attach the video, my bad. 1
Zumber Posted January 5 Posted January 5 Very nice...!! Mind sharing what composition for stars used at 0.22 second? 1
Foguete Posted January 5 Author Posted January 5 (edited) 58 minutes ago, Zumber said: Very nice...!! Mind sharing what composition for stars used at 0.22 second? Sure! KNO3. 50% Al flake 20%. Al Atom 100-150# 15%. S 15%. Dex +5% Boric acid+1% Edited January 5 by Foguete
Foguete Posted January 13 Author Posted January 13 On 1/5/2025 at 2:24 AM, Zumber said: Oh thank you very much...!! You are welcome 🎆🤟
Foguete Posted January 13 Author Posted January 13 2 hours ago, Richtee said: Crap..I missed this. Bravo! Thank you very much 🎆🎆
ThunderEx Posted January 14 Posted January 14 On 1/5/2025 at 5:35 AM, Foguete said: Sure! KNO3. 50% Al flake 20%. Al Atom 100-150# 15%. S 15%. Dex +5% Boric acid+1% Cool cake! That star is nice. Just wondering how you mix this one, since the comp is more or less a slow flash comp?
Foguete Posted January 15 Author Posted January 15 3 hours ago, ThunderEx said: Cool cake! That star is nice. Just wondering how you mix this one, since the comp is more or less a slow flash comp? Grind the KNO3 and pass it through 100# screen, the sulphur AND dextrin are screened by 100# mesh too. Mix both aluminums, add the rest of the previously screened chemicals and gently screen 3 times through 30# screen. After this you can start rolling or pressing this comp. In my experience Is not that similar to flash burst, the atomized aluminum make this burn slower and More sparkly rather than flash.
ThunderEx Posted January 15 Posted January 15 The flake alu makes pretty good flash. Mixing both alus first is probably a good idea, but I would still treat it with caution, avoiding friction and static electricity. Thanks!
Foguete Posted January 15 Author Posted January 15 1 hour ago, ThunderEx said: The flake alu makes pretty good flash. Mixing both alus first is probably a good idea, but I would still treat it with caution, avoiding friction and static electricity. Thanks! The flake aluminum is actually bright flake aluminum (1500#), pretty messy as it gets airborne easy. This composition is not very sensitive, actually i had to give a layer of hot prime as it needed more temperature to ignite. All cautions are welcome, how do you avoid static electricity btw?
ThunderEx Posted January 15 Posted January 15 I know, messy stuff, but as I said makes pretty good flash. I guess it's only sensitive as fluffy powder. When rolled and compacted it's another story. Reg. static... wearing all cotton clothes helps and working when the weather is more humid.
Foguete Posted January 15 Author Posted January 15 (edited) 5 hours ago, ThunderEx said: I know, messy stuff, but as I said makes pretty good flash. I guess it's only sensitive as fluffy powder. When rolled and compacted it's another story. Reg. static... wearing all cotton clothes helps and working when the weather is more humid. You can also add more humidity to the work environment if you wet with plenty water all the floor of your Workspace. You can also use one of those humidifiers that are sold at growshops plus a termohygrometer. This will help you monitoring your working parameters, ensuring safe humidity levels in order to keep static risk at the lowest possible. Edited January 15 by Foguete 1
johnnypyro Posted January 17 Posted January 17 Excellent! Do you have any shots of the device and/or fusing?
Foguete Posted January 18 Author Posted January 18 On 1/13/2025 at 11:20 AM, Almostparadise said: Nice work!! thank you very much!
Recommended Posts