Zumber Posted July 2 Share Posted July 2 Good evening all..!! After testing various small and medium size shells here is first attempt made on 12 inch shell in shell. Unfortunately we didnt shoot or capture photos of shell construction( have no good camera). Test fired footage is also of poor quality because it is shooted with mobile phone. Shell height should be more but next time will add a bit more lift. Shell casing is fully made of cylindrical shape plastic casing ( including end side too to fix spolette) and other side is fixed with circular plastic disk too. Inside of shell 2 inch round willow plus colour star mini shells are arranged and these small inserts are timed using spolette having 2 to 3 second delay. Between cannule and shell insert few colour stars are mixed with burst charge and main burst is placed in middle (cannule) Shell is then finished and wrapped with two layers of cotton cloth using white glue then it is spiked using jute and again one layer of cotton cloth is pasted using white glue thinned with water. Finally it is pasted with kraft paper and glue. https://youtube.com/shorts/yeUgddKmwPY?si=xz2uW1eaFEqpIKM5 1 Link to comment Share on other sites More sharing options...
ThrownBiscuit Posted July 3 Share Posted July 3 Beautiful, that was very nice. Link to comment Share on other sites More sharing options...
Zumber Posted July 4 Author Share Posted July 4 3 hours ago, ThrownBiscuit said: Beautiful, that was very nice. Thank you.😄 Next time we will try out ball shell. Link to comment Share on other sites More sharing options...
Recommended Posts