Videosheriff Posted June 9, 2007 Posted June 9, 2007 I was tired of rolling tubes to make my own quickmatch (very time consuming) and decided to try and make my own Sticky Tape quickmatch. It's so simple......Take a piece of 2 inch masking tape and roll your home made blackmatch up in it starting at one side of the tape and rolling it all the way to the other forming a tube..... I was delighted! Not long to sky painting time.....Get to work everybody! Videosheriff
asilentbob Posted June 9, 2007 Posted June 9, 2007 Ah yes as if it was a paper strip... Just be careful, if the tape sticks to itself and closes off part of the tube it might make a delay instead of flashing the fire all the way through.
Mumbles Posted June 17, 2007 Posted June 17, 2007 It might be better to fold over about a half inch or so, and then roll with that under the black match to keep the cavity open. Or just roll with the black match on the non-sticky side.
_DB_ Posted June 17, 2007 Posted June 17, 2007 I've used this method all along, but thanks for sharing I suppose!
Recommended Posts