Jump to content
APC Forum

fireworks colour fountain


Zumber

Recommended Posts

  • 2 weeks later...
For what stars or black powder.?
Link to comment
Share on other sites

Those worked really well, I like how high the fountain appears to be spraying sparks and microstars. Is the height accomplished by nozzle diameter, tube sizes, or a more vigorous composition?
Link to comment
Share on other sites

The tube height is 12 inch ,tube thickness is 1 inch,tube ID is 3 inch in which 3 inch clay is Filled in tube,nozzle is 1 inch diameter.

For one fountain 500 gm black powder is weighted and 160 gm 2 mm sized stars are mixed in black powder black powder is not damped it is in dry form. Nozzle end is covered with masking tape and nozzle is filled with black powder from other side.

Stars mixed with black powder is poured in tube and kraft paper disk of 3 inch diameter is pressed then dry clay is filled and using wooden dowel and hammer clay is rammed only 10 times or it can aslo be pressed but pressure must not be too high else stars inside will get crushed.

Formula for black powder.

Potassium nitrate(passed through 100 mesh screen) 6 kg

Sulphur 2 kg

Charcoal (I used gum arabic tree charcoal as it is commercially available here) 2 kg.

Composition is sieved three times with 40 mesh screen.

Edited by swapnilsutar1988
  • Like 1
Link to comment
Share on other sites

I appreciate it the extra details they sure turned out nice. I'd imagine you guys are pretty busy for so thanks again for sharing.
Link to comment
Share on other sites

You are welcome...!! I am preparing smaller version of same fountain for diwali. I will post updates soon. Edited by swapnilsutar1988
Link to comment
Share on other sites

For green

Bariumnitrate 5500

Magnelium 200 mesh 1500

Parlon 500

Pvc 500

Sulphur 250

Dextrin 250

Or use pvc 1000 colour diminishes some extent but using parlon 1000 increases speed of stars and for fountain we need microstars of slow burning rate.

Strontium nitrate 6000

Magnelium 1750

Pvc 1000

Charcoal 20 gm as a combusion agent

Dextrin 250

Shellac 250

Link to comment
Share on other sites

  • 2 weeks later...

Hey Swapnil, what is your source of PVC/Parlon?

I couldnt find any options that source limited quantities online.

For shellac, i can try using Gum arabic (dink) as an alternative.

Link to comment
Share on other sites

Hey Swapnil, what is your source of PVC/Parlon?

I couldnt find any options that source limited quantities online.

For shellac, i can try using Gum arabic (dink) as an alternative.

From sivakasi pyro hub of India.

You can search local shops in your area. Meet fireworks manufacturers near you and ask them for chemical source.

Gum arabic is only used for black powder type formulation as it is used in solution form and its solution becomes acidic over the time (perferably after 24 hours)

You can use red gum instead of shellac or just avoid shellac from formula the result would be little bit pale.

Link to comment
Share on other sites

Thanks.

Would you be instrested in selling limited quantities? Probably around few kgs.

I think the regular manufacturers would only sell in bulk.

Edited by abhivishw
Link to comment
Share on other sites

I am not professional. I am enthusiastic,I make fireworks occasionally. I dont have raw material stock.

Link to comment
Share on other sites

  • 11 months later...

Diwali 2024 mini fountain 

First is White and second is red microstars.

 

Link to comment
Share on other sites

×
×
  • Create New...