rohit Posted November 6, 2017 Posted November 6, 2017 True Diwali celebration.very nice shell as usual.
clarkie752 Posted November 6, 2017 Posted November 6, 2017 Nice shells thanks for sharing the videos.
SKC Posted April 9, 2018 Posted April 9, 2018 Hi Ben, How you determine your morter for 3",4"......6" shell? Do you prepare them pasting paper or use a common but differently designated iron tube? Please share if there is any specification ?
BengalFlair Posted April 9, 2018 Author Posted April 9, 2018 Fortunately a local acquainted guy makes convoluted paper tubes with various inner diameters so we have endless supply of tubes for mortars. Usually I use paper tubes for mortars up to 4” although I have a 4” iron mortar and two HDPE mortars for 5” and 6” shell.
Aspirina Posted May 10, 2018 Posted May 10, 2018 Hi sr BengalFlair Im very curious to know how do you make that shells, can you descrive how do you make these? seems like you make it little bit diferent than the common methods, do you paste it with tissue paper? Excellent shells like ever!
BengalFlair Posted May 11, 2018 Author Posted May 11, 2018 You might get your answer with the following link-https://www.amateurpyro.com/forums/topic/10779-homemade-70-mm-shell-with-red-peony/?p=143520 2
Aspirina Posted May 11, 2018 Posted May 11, 2018 You might get your answer with the following link-https://www.amateurpyro.com/forums/topic/10779-homemade-70-mm-shell-with-red-peony/?p=143520Thanks!
dynomike1 Posted May 13, 2018 Posted May 13, 2018 On the second video, what was the first thump? Then the lift.
NeighborJ Posted May 13, 2018 Posted May 13, 2018 Mike that was his BM burning in the tube. Mine does the same thing.
pyrogenius007 Posted October 26, 2019 Posted October 26, 2019 what did you use to bind the crackling stars ?, Can you please share the details of the binder you have used for the crackling stars, if it is NC lacquer where is it available in India ? the only NC lacquer I have come across is wood finish which is not 100% pure NC lacquer.
sora Posted October 27, 2019 Posted October 27, 2019 what did you use to bind the crackling stars ?, Can you please share the details of the binder you have used for the crackling stars, if it is NC lacquer where is it available in India ? the only NC lacquer I have come across is wood finish which is not 100% pure NC lacquer. Bengalflair can provide detailed formulations , however I used pingpong balls plus hardware shop paint thinner to get very satisfying results. I'm originally from Bengal.
rellim Posted October 30, 2019 Posted October 30, 2019 Make sure your table tennis balls are made of celluloid. They will have that pleasant odor of camphor and so will anything you bind with it.
AstroCity Posted February 17, 2020 Posted February 17, 2020 I love the effect on the second video. What composition did you use for it?
BengalFlair Posted February 17, 2020 Author Posted February 17, 2020 Please follow the link below-https://www.amateurpyro.com/forums/topic/7939-nishiki-kamuro/?p=104089
AstroCity Posted February 17, 2020 Posted February 17, 2020 Please follow the link below-https://www.amateurpyro.com/forums/topic/7939-nishiki-kamuro/?p=104089 Thank you!
Recommended Posts