calebkessinger Posted January 26, 2017 Posted January 26, 2017 (edited) Just added some smaller 1/2in rocket tooling to the store today! This tooling is made to go with my 1/2in rocket/insert tubes I just got in. They are a high quality 3.5in. tube that is good for hand ramming or pressing. Here's the new tooling. All kinds of fun to be had with this little kit. The simple kit comes a universal spindle and two rammers for making all kinds of little rockets. Or the complete kit comes with an additional short spindle that is good for long screaming whistle rockets, gerbs or endburners depending on your fuel combinations. The flat rod is for pressing whistle inserts for your shells. Of course those are stainless spindles with oversized rims to fit the tube nice and snug just like all my tooling.I just made up a quick whistle on the universal spindle. pressed it in my drill press with no tube support. Here she is. The little hybrid kit with 50 tubes is 90 bucksand the complete kit with 50 tubes is 120. They sure are fun and don't worry about finding tubes cause I bought plenty!http://www.woodysrocks.com/store/p186/1%2F2in_rocket_%2F__insert_tooling... Edited January 26, 2017 by calebkessinger
Mumbles Posted January 26, 2017 Posted January 26, 2017 Looks great Caleb. Would other tubes cut to an appropriate length also work? Not trying to cut into your sales of the tubes, but have some ideas that would need longer devices.
calebkessinger Posted January 26, 2017 Author Posted January 26, 2017 Any 1/2in tube would work. That small hybrid spindle is 2in. overall. so a shorter tube would work fine, and it's no big deal to cut longer rammers if someone wanted them for a slightly longer tube. I don't care about selling tubes. the mark up is so small anyway. I'm just thinking it's nice for someone to get tooling with tubes and can know that they were made for each other and will fit nicely. I bought those tubes for a bunch of different uses. Whistle to report inserts, baby rockets, and some people want them to attach cylinder shells to 1lb rockets they fit perfectly over a spollette and into the 1lb tubes I just bought.
wildcherryxoxo Posted January 27, 2017 Posted January 27, 2017 I love it!! The insert accessory is a nice touch!
otto Posted January 28, 2017 Posted January 28, 2017 Well you finally got me. Looks like a nice addition to a budding rocketeers workbench. Got one comin' at you.
calebkessinger Posted January 29, 2017 Author Posted January 29, 2017 Made some strobes up with these today! 1
calebkessinger Posted January 31, 2017 Author Posted January 31, 2017 (edited) Moving up the scale on these. Made up the 5/8 set today! Here's the vid of em. and with bp Get em here! http://www.woodysrocks.com/store/p187/5%2F8_Small_hybrid_rocket_tooling.html I'm gonna make these in all sizes and get tubes to go with them eventually. Edited January 31, 2017 by calebkessinger
Nitrotitanite Posted January 31, 2017 Posted January 31, 2017 Beautiful strobe composition which you used?I'd like to replicate the effect.
calebkessinger Posted March 7, 2017 Author Posted March 7, 2017 sorry I missed your post. am perc. 60200 - 325 mesh mg al 21milled mg al 4barium sulfate 15 Pot dicromate 5Vaseline 2
Recommended Posts