OldMarine Posted February 5, 2017 Posted February 5, 2017 That's a bargain! I bought the Allpax brand board and the rubber top peeled up after about 10 minutes in the sun. They must have used bubble gum to stick it on. I had to clean it all off and use contact cement to put it back on.
Livingston Posted February 6, 2017 Posted February 6, 2017 Sounds good Mike pm your email and what I need for shipping. And I'll go with 18"
Arthur Posted February 6, 2017 Posted February 6, 2017 When a UK pyro company changed hands a few years ago the arbour presses and punch tools were the high value items -one punch tool for each size of plug they could possibly need. without the tools thousands would be spent to replace them all. Sometimes you do have to spend the money
rohit Posted June 26, 2017 Posted June 26, 2017 You can use Olfa circle cutters made in Japan. I bought two small cuts till 6" and bigger one cuts till 12". 1
lloyd Posted June 26, 2017 Posted June 26, 2017 An AllPax cutter (frequently found on Ebay, used) seems to be the 'favorite tool' of anyone who's tried one. Lloyd
OldMarine Posted June 26, 2017 Posted June 26, 2017 I have both an Allpax and a Spearhead gasket cutter and they work exactly the same. You can still purchase OEM blades for the Allpax but the Spearhead is no longer made so replacement blades are unavailable. I've found that Exacto hobby knife blades can be made to work well and are much cheaper than Allpax blades.
mikeee Posted June 27, 2017 Posted June 27, 2017 These punches work pretty good for smaller shells.The allpax type cutter for 2" and larger discs 1
marks265 Posted June 28, 2017 Posted June 28, 2017 There are punches like this for bigger diameters, but I can't recall what they are called. I spent an hour looking for them yesterday. I could swear McMaster Carr had them but I sure as heck can't find them now! These punches work pretty good for smaller shells.The allpax type cutter for 2" and larger discs
calebkessinger Posted June 28, 2017 Posted June 28, 2017 http://www.woodysrocks.com/store/p188/1%2F4_-_1_1%2F2%22_Disc_Punches_.html
OldMarine Posted June 28, 2017 Posted June 28, 2017 Caleb, you left out the fact that you cut your discs with a "FRICKIN' LASER BEAM"!
calebkessinger Posted June 29, 2017 Posted June 29, 2017 oh...you can buy a laser also..The 1/8in. discs cut slow but the 1/16in. thick ones cut like butter.
Knexxo Posted March 25, 2020 Posted March 25, 2020 (edited) Hey Folks, Maybe i can inspire some of you with my homemade Allpax "style" Cutter.Its not stepless adjustable, but i can cut discs for 2" and 3" canister shells. There is no problem to add few more holes for larger discs. http://pyrobin.com/files/IMG_20200325_180035.jpg http://pyrobin.com/files/IMG_20200325_180046.jpg http://pyrobin.com/files/IMG_20200325_181011.jpg http://pyrobin.com/files/IMG_20200325_180829.jpg https://www.youtube.com/watch?v=_MOiRYr1T1M&feature=youtu.be Knexxo Edited March 25, 2020 by Knexxo 1
Recommended Posts