Bangkokpyro Posted November 5, 2015 Posted November 5, 2015 (edited) I made this video a few weeks ago showing my way of joining multi break shells together. I use pasted Hemp twine or as in this case tarred twine. https://www.youtube.com/watch?v=ySKfjt2YYF8 Edited November 5, 2015 by Bangkokpyro 2
Ubehage Posted November 6, 2015 Posted November 6, 2015 (edited) Thank you It looks somewhat easy, compared to the off-center method. Edited November 6, 2015 by Ubehage
Bangkokpyro Posted November 7, 2015 Author Posted November 7, 2015 Off center spiking is just as simple to do.I did off center spike the individual shells before joining them together. This keep the build up of twine around the discs and Spollettes flat so the breaks fit level and flush with one another. I used the through the center point on the bottom and around the spollette at the top method to join the breaks together to anchor the Spollette firmly in place and give turns of twine around the spollettes base to keep fire out.
Recommended Posts