Maxim Posted November 1, 2015 Posted November 1, 2015 Can someone share a table for turning meshes into milimmiters? In Russia we use mm, and you use mesh... Thanks_)
MadMat Posted November 1, 2015 Posted November 1, 2015 This might help you out http://www.alibaba.com/product-detail/high-quality-metal-mesh-fabric-window_529060235.html. the chart is a bit down the page.
Mumbles Posted November 1, 2015 Posted November 1, 2015 The biggest problem is going to be that mesh is not an absolute measure of size. It's holes per linear inch, which takes into account wire diameter. As I'm sure you know, the thicker the wire, the smaller the opening. 1
MadMat Posted November 1, 2015 Posted November 1, 2015 The site I posted has more than one chart, and they take into account for different "weaves". I know its not perfect but it's will give a decent approximation
Ubehage Posted November 1, 2015 Posted November 1, 2015 Can someone share a table for turning meshes into milimmiters? In Russia we use mm, and you use mesh...Thanks_)Mesh is the number of holes per linear inch. (not square inch!)Depending on the wire thickness, the size of the holes will vary. I don't think there is a defined standard. I haven't found it, if it exists
Recommended Posts